Finally there is a sliding compound mitre saw that combines a large cutting
capacity with a compact, lightweight design, achieves the precision needed for
high-quality results and offers innovative solutions that would inspire any
professional user.
Here are 17 reasons why you should buy the Kapex KS120!
- MMC Electronics - with variable speed pre-selection, smooth
start-up, safety brake and overload protection. The MMC electronics minimise
working stress and adapt machine performance to the material.
- FastFix saw blade changing system - rapid blade changes
with a convenient saw blade changing system that saves you time and money.
- Convenient operation - the guard release is integrated
in the two-stage switch and is centrally positioned, making it suitable for
both right or left handed operators. The same applies for the safety switch-on
lock.
- Dust extraction - the KAPEX is fitted with an extraction
connector and an efficient chip catcher. Dust and chips are extracted as they
are produced.
- Setting accurate to the millimetre - fine bevel angle adjustment
are made from the front of the machine, for precise cutting angle. Makes complex
cuts in no time at all.
- Precise trenching - cut accurate trenches with the stepless
trenching depth adjustment; simply actuate the lever, set the trenching depth
with a single turn and start working...
- Secure workpiece support surface - the large, adjustable
quick-release fences allow accurate positioning of workpieces in their 'finished
angle position' and the attachment of custom-made positioning supports.
- Precision dual-line laser - whether you position the workpiece
from the left or right, the laser lines always show the exact width of the
cut and make easy work of precise cuts.
- Robust and stable - the KAPEX was designed for tough industrial
applications. The large magnesium die cast base with rubber feet provides
maximum stability.
- Easy-to-read scales - the easy-to-read scales are abrasion-resistant,
the pointer can also be finely adjusted. Adjust the mitre angle up to 50 degrees
left and 60 degrees right, with the quick release lever.
- Easy transportation - easy to transport at only 21.5kg.
With integrated transport safety device, cable holder and ergonomic hand grips
- the KAPEX is ideal for on-site applications.
- Smart bevel included - transfer interior and exterior angles
precisely from the workpiece to your KAPEX using the smart bevel.
- Intelligent base height - the KAPEX saw base is the same
height as the SYSTAINER SYS 1, which can be used to support long workpieces
when working on the floor.
- 120mm Cutting depth - the special cutting position on the
KAPEX allows you to cut skirting boards with a maximum height of 120mm quickly,
safety and accurately.
- Space-saving precision design - the innovative twin column
guide holds the saw blade in position with even greater accuracy and allows
you to work right up against the wall.
- Fast, accurate bevel cuts - the bevel angle is easy to
adjust from the front. Simply lift the bevel lock, set the angle and lock
it in - it couldn't be easier...
- No dangerous obstacles - the cable holder keeps your workplace
tidy and eliminates tripping hazards during transport.
Included:
- HW Universal saw blade W60
- Smart Bevel
- Workpiece clamp
- Operation Tool
$0.00
Privacy
