Finally there is a sliding compound mitre saw that combines a large cutting capacity with a compact, lightweight design, achieves the precision needed for high-quality results and offers innovative solutions that would inspire any professional user.

Here are 17 reasons why you should buy the Kapex KS120!

1. MMC Electronics - with variable speed pre-selection, smooth start-up, safety brake and overload protection. The MMC electronics minimise working stress and adapt machine performance to the material.
   
2. FastFix saw blade changing system - rapid blade changes with a convenient saw blade changing system that saves you time and money.
   
3. Convenient operation - the guard release is integrated in the two-stage switch and is centrally positioned, making it suitable for both right or left handed operators. The same applies for the safety switch-on lock.
   
4. Dust extraction - the KAPEX is fitted with an extraction connector and an efficient chip catcher. Dust and chips are extracted as they are produced.
   
5. Setting accurate to the millimetre - fine bevel angle adjustment are made from the front of the machine, for precise cutting angle. Makes complex cuts in no time at all.
   
6. Precise trenching - cut accurate trenches with the stepless trenching depth adjustment; simply actuate the lever, set the trenching depth with a single turn and start working...
   
7. Secure workpiece support surface - the large, adjustable quick-release fences allow accurate positioning of workpieces in their 'finished angle position' and the attachment of custom-made positioning supports.
   
8. Precision dual-line laser - whether you position the workpiece from the left or right, the laser lines always show the exact width of the cut and make easy work of precise cuts.
   
9. Robust and stable - the KAPEX was designed for tough industrial applications. The large magnesium die cast base with rubber feet provides maximum stability.
   
10. Easy-to-read scales - the easy-to-read scales are abrasion-resistant, the pointer can also be finely adjusted. Adjust the mitre angle up to 50 degrees left and 60 degrees right, with the quick release lever.
    
11. Easy transportation - easy to transport at only 21.5kg. With integrated transport safety device, cable holder and ergonomic hand grips - the KAPEX is ideal for on-site applications.
    
12. Smart bevel included - transfer interior and exterior angles precisely from the workpiece to your KAPEX using the smart bevel.
    
13. Intelligent base height - the KAPEX saw base is the same height as the SYSTAINER SYS 1, which can be used to support long workpieces when working on the floor.
    
14. 120mm Cutting depth - the special cutting position on the KAPEX allows you to cut skirting boards with a maximum height of 120mm quickly, safety and accurately.
    
15. Space-saving precision design - the innovative twin column guide holds the saw blade in position with even greater accuracy and allows you to work right up against the wall.
    
16. Fast, accurate bevel cuts - the bevel angle is easy to adjust from the front. Simply lift the bevel lock, set the angle and lock it in - it couldn't be easier...
    
17. No dangerous obstacles - the cable holder keeps your workplace tidy and eliminates tripping hazards during transport.

Included:

• HW Universal saw blade W60
• Smart Bevel
• Workpiece clamp
• Operation Tool