The outstanding Leigh FMT jig is appearing more and more in workshops around the world. After all, it is mortise and tenon joinery that holds most of the world's fine furniture and cabinetry together. Only the FMT uses a single guide and bit to cut both mortises and tenons with speed and precision that you have to see to believe. The FMT is so easy to use and so efficient that it brings professional quality joinery within the reach of any shop, from basement to custom studio to factory floor. Unit weight: 14kg.

FMT features

• over 70 sizes of mortise and tenons
• standard joint guides available in 1/4" (6.35mm), 5/16" (7.9mm), 3/8" (9.5mm) and 1/2" (12.7mm)
• maximum 1/2" (12.7mm) x 5" (125mm) joint size
• double, triple and quadruple joints
• easily recorded, repeatable joint tightness adjustment
• angled and compounded angled joints
• works with virtually any plunge router

Standard Equipment

• universal sub-base that attaches to virtually any plunge router
• five 5/16" (7.9mm) joint guides: these include 5/16" (7.9mm) x 1/2" (12.7mm), 3/4" (19mm) x 1" (25.4mm) and 1-1/4" (31.7mm) x 1-1/2" (38.1mm)
• joint guide stand
• 5/16" (7.9mm) HSS spiral bit with 1/2" shank (Leigh no. 170-500)
• adjustable side stop fence for tenoning
• fully illustrated user guide

Note: a 1/2" plunge router is essential to achieve the full potential of the FMT. See router selection below:

Bosch: 1611, 1611EVS, 1613, 1613EVS, 1614, 1614EVS, 1615, 1615EVS, 1617 plunge base, 1619EVS, B1450, B1550, GOF1600, GPF1700ACE

DeWalt: DW614, DW615, 616 plunge base, 618 plunge base, DW621, DW621K, DW624, DW625, DW625EK

Festo: 900, 1000, 1010, OF1400, OF2000, OF2000E

Hitachi: TR8, TR12, M8, M12 series

Makita: 3600, 3612, 3612B, 3612BR, 3612C, RP1100, RP1101, RP0910, RP1110C

Metabo: OFE728, OF1028, OFE1028, OFE1229

Ryobi: R150, R151, R500, R501, R502, R600, R601, RE600, RE601

Triton: TRA001 (requires special screws for fitting to FMT jig)