Dust free routing! The revolutionary Leigh VRS system provides almost 100% dust and chip collection as well as amazing full width router support. The VRS is a must for all Leigh dovetail jig owners.
The VRS is mounted on brackets on the front of the jig and the router is supported by the finger assembly and the full width beam of the VRS. The vacuum chute rides under the support beam. Control arms - attached to the vacuum chute - surround the router. These arms are adjustable to accomdate any router base. As the router moves across the joint, the vacuum chute glides effortlessly from side to side on nylon rollers. The chute is always in perfect position to catch the dust and chips thrown out by the router bit. Chips and sawdust are drawn into the vacuum chute and down through the vacuum hose. Each VRS comes complete with two adaptors to fit all popular vacuum hose sizes and the VRS can be used with a small shop vacuum or a large built-in system. The VRS attaches easily to the jig without modification. Each VRS comes complete with all mounting hardware needed for any jig. Available for use with Leigh Superjigs (12", 18" or 24") or with the D4R.
Features
- Full width router support
- Easy on/off - powerful rare earth magnets secure router support beam
- Park the router when not in use
- Vacuum box glides effortlessly under router support beam
- Control arms position vacuum box
- Control arms adjust to fit any router
- View is not obstructed by hose
- Does not require modifications to the jig
- All mounting hardware included
- Adapts to any hose size
Standard Equipment
- Router support beam
- Vacuum chute
- Hose adaptors - large and small
- Support rails
- Finger assembly support brackets for use where required
- Screws and washers
- Hex key
For even greater value, combine Leigh's Vaccum Router Supports with a Leigh router bit set - refer details below.
$0.00
Privacy
