• 3/4", 1" and 1-3/4" spindle spacings
• Hardened drill guides maximise drill life
• One-touch foot pedal operation
• Swing stops for material positioning
• Dust collection chutes for chip removal
• 240 volt / 1-1/2hp motor

The DK3100 is the only machine on the market that has the ability to drill two pocket holes in one cycle across rails of varying widths. Drill spindles in the machine are fixed at 3/4", 1" and 1-3/4" on centre, allowing it to drill today's most common rail widths of 1-1/2" (38mm) up to 3-3/4" (95mm) in one machine cycle.

The machine utilises three step drill bits, one of which is left-handed. Like all Kreg machines, the DK3100 features the ability to centre a screw in 1/2" (12.75mm) to 1-1/2" (38.1mm) thick material. Fitted with a one-touch foot pedal that fires the triple spindle drill head on one second. Note that a 1 CFM capacity air compressor is required but not supplied.