These genuine Swansdown mops are made right here in Australia and are one of the best ways we have found to put a brilliant wax finish onto timber especially if you are using our EEE-Ultra Shine, Traditional Wax or both. They also work extremely well with Shellawax and Shellawax Cream.

Using one of these mops can cut the time it takes to buff a wax finish to a matter of seconds, depending upon the size of the work to be buffed. A tabletop will only take a couple of minutes easy work with the 100 fold buff compared to around 15 minutes or more of arm wrenching, back aching hand rubbing. It will leave a much nicer shine on the timber because it is working with the grain rather than putting swirls on the surface that you would get from using a lambs-wool, which works with a circular motion. These mops also work much cooler than a lambs-wool buff in a drill or angle grinder, making them much safer to use on surfaces that may be effected by heat.
Suitable for attachment to lathe spindles via screw chuck, etc (not supplied), a bench grinder using a tapered cone (not supplied) or a drill press, using a bolt and washers (not supplied).

Available in 150 x 75mm size (75 cloth folds) or 100 x 50 size (50 cloth folds). Both sizes have nylon centre flange.