Making three bowls from one block of wood is a breeze with Woodcut's Bowlsaver. Cut perfectly shaped bowls ranging from 75mm to 330mm in diameter and up to 125mm deep. The two steel radial blades are fitted with Stellite cutter tips which in normal use should cut up to 300 to 500 bowls before the tips will need to be replaced (the tips will, however, require sharpening in the meantime). Full instructions are provided to complete this process. You may find it easiest to sharpen with a small diamond lap stone. The Bowlsaver fits into the post socket in your lathe banjo via a toolpost (one post included with the Bowlsaver - additional posts can be purchased separately). Please specify your toolpost size when ordering. For added stability, the unit also plugs into the MT2 socket in your lathe tailstock. Weight: 4.1kg.