Fitted with superior parallelogram system for easy and accurate table adjustment. Rack and Pinion fence adjustment, and high mounted switch for safe and easy operation. Perfect for the large workshop or in heavy production environment.

The Spiral Advantage
Spiral cutterheads revolutionise your woodwork! Although the cut depth per pass may be less than equivalent standard cutterheads, they will offer significantly quieter running, quieter cutting, less chatter and tear out in curly or highly figured wood along with a far superior overall finish, requiring far less finish sanding. These cutterheads will save hours of clean up work after dressing timber. The four-sided knives, which can be turned to offer a new cutting edge in seconds are fine grain tungsten carbide and are held in place by a Torx style screw. Knives of this type last 3 to 5 times longer than good quality HSS knives. Multiply this by four cutting edges and you achieve 12 to 20 times normal blade life. They are easily turned and seated to present a fully sharpened and indexed cutting edge, no complex blade setting or jigs required, you only have to replace a knife when all four edges have been used. Using this style of cutterhead also reduces the size of the shavings produced when cutting, thereby increasing the effectiveness of your dust collection setup.

Motor	3hp, 240v
Table length	2120mm
Table width	320mm
Rabbeting Capacity	20 x 300mm
Fence tilt	-45° to +45°
Fence stops	-45°/90°/+45°
Cutterhead spiral	52 insert knives
Workshop footprint	2120 x 990 x 1060mm