My Store:
Change Store

Veritas Bench Blade - 6mm 3/4" stud

Product Code: 05G22-10

$36.00 inc GST In Stock Out Of Stock Please See Attributes
Increase value Decrease value
Quantity in cart:  
Our brand new 2018 Summer Product Guide is now available, and will be automatically sent to all customers that purchase online from 17/10/2018 - until stocks run out! You can also request a copy by calling our Customer Care Centre on 1800 658 111

Description
This is essentially a low-profile bench dog with a quick-release sliding jaw for holding work. Dubbed a inchbladeinch due to its flat design; it projects just 1/4inch above a work surface to permit maximum access to a workpiece. Used much like a toggle clamp; it has a thumb-operated eccentric cam lever to control the sliding jaw; so you can quickly secure or release work. With 1/4inch range of travel; the jaw has limited throw; but applies up to 300 lb of clamping force. Flats on the cam provide secure stops at 1/8inch and 1/4inch of travel. The 1-1/2inch x 1/4inch jaw face has a 5ยก inward cant to help hold wood securely. The cam and jaw are cast steel; heat-treated for surface hardness; and the post and wedge-lock mechanism are turned steel. The standard post version is for use in a through-hole or a blind hole that is at least 1-7/8inch deep. The wedge-lock version is usable at any angle from horizontal to vertical; and anchors firmly in a through-hole in material as thin as 5/8inch (depending on the stren
Product Specifications
Brand Veritas