My Store:
Change Store

Veritas Hold Down

Product Code: 05G14-01

$149.00 inc GST In Stock Out Of Stock Please See Attributes
Increase value Decrease value
Quantity in cart:  
Our brand new 2018 Summer Product Guide is now available, and will be automatically sent to all customers that purchase online from 17/10/2018 - until stocks run out! You can also request a copy by calling our Customer Care Centre on 1800 658 111

Description
The Veritas Hold-Down can clamp workpieces to a bench or anywhere a 3/4inch hole can be drilled.Exceptionally high clamping forces can be obtained with this hold-down for two reasons. First; with the arm free to pivot independently; all levered forces are exerted downward; without any losses due to horizontal slippage from the canting action of the hold-down post. Second; the fine barb-shaped grooves on the post resist upward forces; yet still allow easy entry into a hole.The long; low-profile arm is unobstructed at the clamping end; allowing good access to work from all sides. The 10inch (254mm) hold-down post gives you 8inch (200mm) of clamping capacity; matching the 8inch throat capacity.Used vertically in the top of a bench; or horizontally in a side skirt. Clamping forces are infinitely variable by hand tightening the clamping knob (machined brass) to any degree.The arm and body are made from the high-strength zinc aluminum alloy ZA-12; and the post from machined steel.
Product Specifications
Brand Veritas