My Store:
Change Store
My Store:
Change Store

Maneater - DinoBone 4 - Combo Mould (16 Inserts)

Product Code: ME-DINO4

$129.50 inc GST
In Stock Low Stock Out Of Stock Please See Attributes
Buy Quantity Price (each) You Save %
Increase value Decrease value
Quantity In Cart:  


Tags Maneater
Download PDF
  • Details
  • Specifications

This new range of Maneater semi-permanent moulds won’t warp or crack and will take more abuse than traditional silicone moulds. They are milled from blocks of HDPE (High Density Polyethylene) making them solid and tough.

Best of all, they stack so there is no need for a casting rack!  

Demolding is easy!  Just pull the suction plugs, turn the mould upside down, rap the ends a few times on your work bench and watch the blanks fall out.  

This mould system has overall dimensions of 7.25" x 6.75" x 1.60" (18.42 x 17.15 x 4.06 cm) with four casting chambers, each measuring 5.25" x .84375" x 1.0" (13.34 x 2.14 x 2.54 cm).  The blanks can easily be end trimmed and squared up on a table saw, if so desired.

Includes eight large stopper silicone inserts and eight small stopper silicone inserts!  The small stoppers will accommodate tubes 7mm - 27/64" in diameter.  The large stoppers will accommodate tubes 27/64" - 13.2mm. 

Important Notes:

A release agent must be used due to the rigidity of the moulds. Simply apply the release agent into the chambers and on the silicone inserts, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin build-up caused by potential spillage. 

A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mould once your blanks have fully cured, then turn the mould over and lightly rap the mould ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.

Brand Maneater

Accessories

$4.50 inc GST (EACH)
Increase value Decrease value
Qty Each
$4.50 inc GST (EACH)
Increase value Decrease value
Qty Each
$1.50 inc GST (EACH)
Increase value Decrease value
Qty Each
$1.00 inc GST (EACH)
Increase value Decrease value
Qty Each

Alternatives

$78.90 inc GST (EACH)
Increase value Decrease value
Qty Each