My Store:
Change Store

Festool CT Midi Dust Extractor with T-Loc

Product Code: FE-584164

$869.00 inc GST
Increase value Decrease value
Qty in cart: 0
Features & Benefits
  • Assembly and installation work
  • Dust extraction when sanding, routing or sawing
  • Final onsite clean up
  • Wet and dry extraction
  • Systainer transport system
  • 99.95% separation efficiency at .03 microns when using a HEPA filter(sold separately)
  • Extremely compact and lightweight with large 15L container capacity
  • Constant high suction with compact high performance turbine
  • Antistatic function to prevent static build up during use
  • Secure attachment of Systainers via Sys-Dock
Description

The 15L Festool CT MIDI dust extractor is an excellent choice for both workshop and jobsite use. The flat filter maximises the amount of dust that can be held while maintaining an optimal suction rate.

The air flow can be adjusted dependent on the job. A three way switch is fitted, so it can be switched on or off, with the ability also to activate when a tool is used with power tools.

The shut-off delay means that it stays on after the tool it is being used with has been turned off, allowing that last bit of dust to be sucked up. The Hose is antistatic, so dust will not collect on it, either outside or inside clogging it up. The hose is a good length, so the vacuum is not needed to be overly close to the job, therefore getting in the way.

Fittings are integrated into the moulding to secure Festool SYSTAINERS to the top of the unit to keep all tools together.

Approved for dust class L, the Festool CT MIDI offers a dust free work environment, and is supported by Festool's comprehensive 3-year warranty.

Included:

  • Fitted filter bag
  • Antistatic suction hose Ø 32/27mm x 3.5m long with rotating collar
  • Integrated hose garage
  • SYS-Dock with T-LOC function
  • Extractor machine
Product Specifications
Brand Festool
Air Movement 3700 l / min
Workshop Footprint (WxDxH) 430mm x 330mm x 470mm
Nett Weight 9.0Kg