My Store:
Change Store

Veritas String Inlay Scraper

Product Code: 05P32-10

$106.00 inc GST In Stock Out Of Stock Please See Attributes
Increase value Decrease value
Quantity in cart:  
Our brand new 2018 Summer Product Guide is now available, and will be automatically sent to all customers that purchase online from 17/10/2018 - until stocks run out! You can also request a copy by calling our Customer Care Centre on 1800 658 111

Description
The critical dimension for string inlay material is thickness. If too thick it wont fit into the groove; too thin, and it will leave an unsightly gap. This tool scrapes veneer or any narrow, thin stock up to 2-1/2" wide to the exact thickness required. Instead of a sole that travels on top of the material, it has two skates to elevate the blade from the work surface. This allows the inlay material to pass underneath the tool, and the skates to act as a depth stop for the blade. The blade height is adjusted relative to the work surface and is set to match the width of the inlay groove (just use the thickness of your grooving blade as a shim when setting the blade height; no need to fiddle with micrometers or rulers). The inlay is then scraped until the skates make full contact with the work surface. The 2-3/4" wide blade has two edges ground at 45Deg. so that the blade can be flipped over, reducing the frequency of sharpening sessions. Two brass clamps, tightened with thumbscrews, hold the blade. The skates
Product Specifications
Brand Veritas