The Jet drill press is the drill press that every woodworker needs for their workshop. Its large 355mm x 482mm table has T-slots that take either 5/16" hex bolts for jigs, or a Kreg Bench Clamp. There is also the standard CROSS slots for attaching vices and clamps that all drill presses have. The column lock that holds the table steady is solid, easy to use and there is no play in it so a positive locked table is guaranteed every time. The wrench required is conveniently magnetic for storage on the drill press head - always in reach.
The removable sacrificial timber insert is attached by screw underneath, with 4 screws to adjust the height of the insert flush with the table.
Belt changes are a quick and easy process, so that the correct speed can be selected for the job at hand, rather than drilling at the wrong speed because it's too hard to do.
The Xacta-X Twin Laser system makes it a simple task to pinpoint your drilling target, with an "X" marking the spot. The exceptional build quality in the quill travel keeps the chuck straight along the whole 127mm travel.