With two independently adjustable rods, this gauge lets you set two measurements at once, so you can quickly alternate between them when transferring or marking repetitive dimensions.

Projection up to 5-3/4" is easy to set, since an internal O-ring keeps light but constant friction on each rod; a thumbscrew locks the setting. The hardened steel wheel cutters scribe perfectly at any point of their circumference. Since they cut wood fibers rather than tear, marks are clean, even on cross grain. The cutting wheels are oriented with opposing bevels, ensuring that you can always set the bevel in the waste side of a cut.

One rod has its cutting edge at the extreme end of the rod, making it useful for transferring dimensions such as tenon shoulder and mortise depth. Each cutter can be retracted into the brass face for safe storage or to permit use with a single cutter. The eccentric placement of the rods ensures a large reference face and helps the gauge resist rolling on a surface.

Aluminum housing with brass face and stainless-steel rods. 7-1/4" overall.

Made in Canada.

You can view the products listed here on page 64 of our general catalogue.

If you don't have a catalogue, find out how to get one here.

Please note that pricing shown in the PDF printout reflects pricing shown in the current Carba-Tec print catalogue. This pricing is in Australian dollars and includes Australian GST. Pricing shown here on your local site supersedes this catalogue pricing.