My Store:
Change Store
  • Veritas PM-V11-Chisels

Veritas PM-V11-Chisels

Our chisel blades taper from shoulder to tip for strength and rigidity, and have parallel sides and true bevel edges for clearance and minimal friction when working into an angled corner or a tight recess. To ensure the face of the blade is both smooth and true, we lap each blade to a flatness tolerance of ±0.0005" over the entire surface.

The blade and handle are connected with a tang and a socket-like ferrule. Flats on the tang prevent the handle from rotating. Turned from solid stainless steel, the ferrule seats directly onto the shoulder of the blade. Repeated mallet blows tighten the joint through use. Each chisel is superbly balanced, with the center of gravity at or below the tang/socket connection.

The hard maple handle has been kiln-baked at a high temperature to eliminate nearly all moisture and caramelize the natural sugars in the wood. This imparts a rich, dark color to the wood, while helping to seal it against humidity changes, making it resistant to swelling and shrinkage. The contoured handle fits the hand nicely and has shallow flats parallel to the blade back for finger placement. The domed end resists chipping from glancing mallet blows.

The chisels are available in 1/4", 3/8", 1/2", 3/4" and 1" widths, with blades from 4-5/8" to 5 1/8" long. The 1/4" and 3/8" chisels have 30° primary bevels; the others are 25°. All have 2° micro-bevels and require only final honing before use.