My Store:
Change Store
My Store:
Change Store

Carbatec Bandsaw Blade (L = 3080mm - W = 10mm - TPI = 6)

Product Code: BBL-3080-10-6

Tags Carbatec
$51 inc GST
In Stock Low Stock Temporarily Out Of Stock Please See Attributes
Buy Quantity Each (inc GST) Price (each) You Save %
Increase value Decrease value
  • Details
  • Specifications

A 10mm x 6TPI will be capable of shallow curves and still give a reasonable result requiring a minimal amount of sanding afterwards, in material 10mm to 40mm in thickness. 

Blade selection:

The amount of Teeth Per Inch relates directly with the thickness of timber it is capable of cutting. The fewer the amount of teeth, the more sanding will be needed to clean up the surface yet will cut quite quickly, and the more the teeth the cleaner the cut will be, yet will cut a lot slower. Thicker timber is going to require a blade with less teeth to cope with such a cut. 

The width of the blade, which is measured from the back of the blade to the tip of the teeth, will determine the radius the blade is capable of cutting, the smaller the blade means the tighter the radius possible. Likewise, the larger the size, the more it is designed for ripping in straight lines and less capable of cutting arcs and curves, to the point where only straight cutting will be done.

Specifically designed for Carbatec’s new BS-X345 Series bandsaws.

Brand Carbatec
Blade Length 3080mm
Blade Width 10mm
Teeth Per Inch (Tpi) 6

Accessories

$3,649.00 inc GST (EACH)
Increase value Decrease value
Qty Each (inc GST) Each