Carbatec Lift N Lock Router Lift - suit Fixed Base Routers

The Carbatec 'Lift n Lock' Fixed Base Router Lift is designed to pair perfectly with our RT-RPU2400 Router Power Unit and similar.  (NOTE: This lift is NOT suitible for standard Plunge Routers - see RT-LIFT-UNI)

The Carbatec RT-LIFT-FB is compatible with Router power units with diameters from 81.7mm to 106.68mm, like:

• Carbatec RT-RPU2400 (106.68mm or 4.2" Motor Dia)
• JessEm Pow-R-Tek SR (106.68mm or 4.2" Motor Dia)
• AUK V3 (106.68mm or 4.2" Motor Dia)
• Sherwood SRM-1800 (106.68mm or 4.2" Motor Dia)
• AEG 1400KE (92.07mm or 3.625" Motor Dia.)
• Rigid R29302 (92.07mm or 3.625" Motor Dia.)
• Porter Cable 690/890 (88.9mm or 3.5” Motor Dia.)
• Bosch 1617/1618 (88.9mm or 3.5” Motor Dia.)
• DeWalt 610/618/616 (88.9mm or 3.5” Motor Dia.)
• Makita 1101 (81.737mm or 3.218” Motor Dia.)
• Hitachi M12VC & KM12VC (82.98mm or 3.267” Motor Dia)

The lift is designed to allow you to make fast and accurate cutter adjustments from above the table, and lock securely into place when you're done. No more cumbersome pushing and awkward router locks. No more need to remove and replace your router.  Set up a fully powered machine, with ample power and performance.

A simple and effective upgrade for the Carbatec Compact & Pro Router tables, this unit will also fit Kreg and many other Router Tables with a 297 x 234mm opening, and can also make the centrepiece of your own home-built table. A five-piece set of router table inserts are available, with the standard insert having a 38mm inside diameter. 

Mounting the Router Power Unit requires NO measuring, NO aligning and NO drilling.  Clamp, set, rout!