CMT Saw Blade Bush - 30mm to 25.4mm x 2mm

CMT Saw Blade Bush - 30mm to 25.4mm x 2mm

Product Code:
299-212-00

Used to insert into the arbor of a saw blade to match the smaller saw arbor.
Match the outside diameter of the bush to match the bore of the blade, and the bore of the bush to match the arbor of the saw. Match the plate thickness of the blade to the thickness of the bush, without going thicker or needing to use two bushes. Match thinner bushes to thin kerf blades with a thinner plate thickness.
NOTE: Not recommended for use with dado blades.

$9.20
$12.00 $9.20
Inc GST
Tax included. Shipping calculated at checkout.
Or from $10/week with
Or pay in 4 interest-free payments of $2.30
Carbatec offers a variety of warranties and return options for selected products. Please refer to the Warranty Documentation provided with your purchased product for full details, inclusions and exclusions. See our Terms Of Service for further information.
Need assistance?
Call centre hours: 9am - 5pm AEST Mon - Fri. Closed weekends & public holidays
1800 658 111
Call us
View full details
Product Details

Used to insert into the arbor of a saw blade to match the smaller saw arbor.
Match the outside diameter of the bush to match the bore of the blade, and the bore of the bush to match the arbor of the saw. Match the plate thickness of the blade to the thickness of the bush, without going thicker or needing to use two bushes. Match thinner bushes to thin kerf blades with a thinner plate thickness.
NOTE: Not recommended for use with dado blades.

Additional information
5 specs...
Arbor Diameter
25.4 mm (1")
Bit Cut Diameter
30 mm
Diameter Inside
25.4 mm (1")
Diameter Outside
30 mm
Thickness
2 mm
5 specs...
Arbor Diameter
25.4 mm (1")
Bit Cut Diameter
30 mm
Diameter Inside
25.4 mm (1")
Diameter Outside
30 mm
Thickness
2 mm