Woodworking Workbenches & Work Support

Every accurate cut and clean joint starts with a solid base. The right woodworking workbench gives you the stability to plane, chisel, and assemble with confidence. Our range covers everything from solid timber and modular benches through to roller stands and portable supports. Whether you are fitting out a permanent workshop or a mobile setup, you will find a bench and support system built for the way you work.

Modular Work Benches (1)

Timber Work Benches (11)

Bench Dogs & Stops (36)

Workbench Hardware (17)

PARF System & Accessories (23)

Portable Work Support (11)

Roller Stands & Conveyers (6)

Our Range of Workbenches and Work Supports

Your workspace needs will guide your choice, so we stock several styles to suit different makers.

Solid timber benches offer the mass and rigidity that hand tool work demands, holding firm under heavy planing and chopping.
Modular and MFT-style benches give you flexible clamping and layout options, ideal for jig work and repeatable joinery.
Folding and portable benches suit tight spaces or on-site work, packing away when the job is done.
Roller stands and outfeed supports extend your working area and handle long stock safely.

Fixed workshop setups benefit from a heavy, permanent bench, while mobile or space-limited spaces call for lighter, packable options. Once your bench is in place, adding woodworking and bench vices gives you the workholding needed for precise joinery.

What to Look For in a Quality Workbench

A few key decisions will shape how well your bench serves you over the years.

Top thickness and material: A thick, dense top absorbs vibration and stays flat under load, which matters most for hand planes and chisel work.
Dog holes and clamping options: These let you secure timber flat for planing or upright for joinery, so match the layout to your typical tasks.
Height: Set the bench to suit your work. Lower benches favour hand tool joinery, while a higher surface helps with detailed assembly.
Stability and load capacity: A heavy, well-braced frame stops the bench walking across the floor during aggressive work.

Think about the work you do most often. Hand tool joinery rewards mass and a good vice, while assembly work benefits from a broad, accessible surface. Pairing your bench with reliable clamping keeps workpieces steady during glue-ups.

Work Supports for Long and Heavy Stock

Handling long boards or full sheets alone is where accidents happen. Work supports take the strain and keep your cuts true.

Roller stands, outfeed and infeed supports, and portable supports work alongside your saws, thicknessers, and benches to carry the weight of oversized stock. When you feed a long board through a table saw or thicknesser, a matched support at the correct height stops the timber tipping, dropping, or binding. This protects your accuracy and your safety.

For workshops where machines move often, adding mobile bases and machinery stands helps you reposition equipment and set up supports quickly. Browse our workshop accessories to complete your fit-out.

Frequently Asked Questions

What height should a woodworking workbench be?
A common starting point is around wrist height when you stand with your arms at your sides, which suits general work. If you do a lot of hand planing, a slightly lower bench gives you better leverage. For detailed assembly, a taller surface saves your back.

What is the best timber or top material for a workbench?
Dense hardwoods like beech, hard maple, or local species make excellent tops because they resist wear and stay flat. A thick laminated top adds mass and dampens vibration, which improves accuracy during heavy work. Some makers prefer engineered tops for a stable, cost-effective surface.

Do I need dog holes and a vice on my workbench?
For most woodworking, yes. Dog holes and a vice let you clamp timber securely for planing, sawing, and joinery. Together they turn a flat surface into a proper workholding system, freeing both hands and improving precision.

What is the difference between a workbench and a portable work support?
A workbench is your primary working surface, built for stability during cutting, planing, and assembly. A portable work support, such as a roller stand, is a secondary tool that holds long or heavy stock steady as it feeds through a machine or extends beyond the bench.

How do roller stands help when cutting long stock?
Roller stands support the weight of a board before and after it passes through a saw or thicknesser. This stops the timber tipping or sagging, which prevents kickback, binding, and inaccurate cuts. Set the roller to match your machine's table height for smooth, controlled feeding.

Machinery

Dust Control

Hand Tools

CNC & CNC Cutters

Routing

Joinery

Sharpening, Grinding & Polishing

Workshop Needs

Power Tools

Drilling & Boring

Woodturning

Sanding & Finishing

Jigs & Jig Accessories

Crafts

Measuring & Marking

Books, DVDs & Magazines

Woodworking Workbenches & Work Support

Sort by:

99 products

Recommended products