Mortise Chisel Adapter for Mk II Honing Guide

Mortise Chisel Adapter for Mk II Honing Guide

Product Code:
05M09-12

This adapter for our Mk.II honing guide expands its blade-holding capacity to allow consistent, accurate honing of mortise chisels. It increases the space between the roller base and the blade carrier to accommodate the thicker blades of mortise chisels, holding blades up to 7.5mm [11/16"] thick.
Compatible with the narrow blade clamping heads, the adapter is configured so that the angle registration jig will yield the correct bevel angle in the 30 to 35 range typical of mortise chisels. Cast from a zinc-aluminium alloy.

$26.00
$0.00 $26.00
Inc GST
Tax included. Shipping calculated at checkout.
Or from $10/week with
Or pay in 4 interest-free payments of $6.50
Carbatec offers a variety of warranties and return options for selected products. Please refer to the Warranty Documentation provided with your purchased product for full details, inclusions and exclusions. See our Terms Of Service for further information.
Need assistance?
Call centre hours: 9am - 5pm AEST Mon - Fri. Closed weekends & public holidays
1800 658 111
Call us
View full details
Product Details

• Expands the MK II Honing Guide blade-holding capacity to accommodate mortise chisels
• Accommodates blades up to 7.5mm [11/16"]
• Compatible with the narrow blade clamping heads
• Cast from a zinc-aluminium alloy