WEST SYSTEM Black Pigment - 125ml

WEST SYSTEM 502 Epoxy Pigment: Add Rich, Even Colour to Your Epoxy Mix

Ever mixed up a batch of resin for a coating or a fill, then wished it carried a solid, consistent colour instead of that clear-to-pale look? A patchy, uneven tint can pull attention away from work you've spent hours getting right. WEST SYSTEM 502 Epoxy Pigment gives you an easy way to colour your resin, so your coatings, fills and bonds take on the shade you're after.

Just blend it into your mixed epoxy, and you get a smooth, even colour throughout the batch. Simple to use and made to work hand in hand with your WEST SYSTEM system.

Key Features

• Colours your epoxy resin: Tints your WEST SYSTEM resin so your fills, coatings and bonds carry an even, consistent shade rather than a clear finish.
• Easy to blend in: Stirs smoothly through your mixed epoxy, giving you full control over how much colour you add.
• Made for WEST SYSTEM resin: Formulated to work with your WEST SYSTEM system, so it mixes in cleanly without upsetting the way your epoxy performs.

Ideal For

• Colouring epoxy fills so repairs blend in with the surrounding timber.
• Tinting coatings and bonding mixtures for a uniform look.
• Any indoor project where a consistent resin colour matters.

Specifications

• Type: Epoxy pigment for colouring resin.
• Compatibility: For use with WEST SYSTEM epoxy resin.
• Application: Blend into mixed epoxy to achieve your desired colour.
• Important note: The colour is NOT colourfast and may degrade in sunlight.

A quick tip: because the colour is not colourfast and can fade in sunlight, keep pigmented epoxy for indoor or shaded work, or seal it beneath a UV-resistant topcoat. Start with a small amount of pigment, stir it through fully, and add more only if you need a deeper shade. That way you keep the colour even and avoid overdoing it.

Ready to give your epoxy a clean, even colour? Add WEST SYSTEM 502 Epoxy Pigment to your cart today and craft with confidence.