Swan Tools
Precision layout tools built for real work. Founded by fifth-generation craftsman Izzy Swan, Swan Tool Group designs squares, rulers, depth stops and vacuum tools that hold true, mark clean and stand up to daily use. Every tool is engineered in the USA and tested in working shops, so you get gear that performs as accurately as you do. Find the layout aids that sharpen your setup and steady your hand.
-
SKU: SWAN-R4612ALMSKU:SWAN-R4612ALMSKU:SWAN-R4612ALMRegular price $65.90Regular priceUnit price / per
$0.00Sale price $65.90Regular price $65.90Regular priceUnit price / per$0.00Sale price $65.90 -
SKU: SWAN-OR800MSKU:SWAN-OR800MSKU:SWAN-OR800MRegular price $49.90Regular priceUnit price / per
$0.00Sale price $49.90Regular price $49.90Regular priceUnit price / per$0.00Sale price $49.90 -
SKU: SWAN-FDS800MSKU:SWAN-FDS800MSKU:SWAN-FDS800MRegular price $99.90Regular priceUnit price / per
$0.00Sale price $99.90Regular price $99.90Regular priceUnit price / per$0.00Sale price $99.90 -
SKU: SWAN-ACS200MSKU:SWAN-ACS200MSKU:SWAN-ACS200MRegular price $149.00Regular priceUnit price / per
$0.00Sale price $149.00Regular price $149.00Regular priceUnit price / per$0.00Sale price $149.00 -
SKU: SWAN-PT360MSKU:SWAN-PT360MSKU:SWAN-PT360MRegular price $149.00Regular priceUnit price / per
$0.00Sale price $149.00Regular price $149.00Regular priceUnit price / per$0.00Sale price $149.00 -
SKU: SWAN-SS375MSKU:SWAN-SS375MSKU:SWAN-SS375MRegular price $129.00Regular priceUnit price / per
$0.00Sale price $129.00Regular price $129.00Regular priceUnit price / per$0.00Sale price $129.00
Recommended products
Precision Layout and Measuring Tools
Accurate work starts with accurate marking. Our layout range covers the tools you reach for at the bench every day, each built to a standard you can trust.
- Squares such as the Ridgway adjustable carpenter square, Merlin flat double square and Firehawk trim square give you dependable reference edges for marking, checking and fitting joinery.
- Rulers and offset tools including the Red Tail ruler set and offset ruler help you transfer measurements cleanly and repeat them without guesswork.
- Depth stops like the Falcon let you set a consistent depth and hit it every time, cut after cut.
Match the tool to the task and your marking stays sharp, your joints stay tight and your setup times drop. When you need one reliable reference point across every project, these are the tools that earn their spot on the bench.
Vacuum Tools for Secure Holding
Holding your workpiece steady is half the battle. The Vac Puc range gives you strong, repeatable vacuum holding for clamping, jigs and fixture work, so you can keep both hands on the tool.
Vacuum holding suits a lot of shop tasks:
- Workholding on smooth surfaces where traditional clamps get in the way.
- Jig and fixture setups that need a fast, secure grip you can release just as quickly.
- Grabo compatibility through the dedicated vac plate, extending what your existing gear can do.
Replacement seals keep the system sealing tight over the long run, so a small part swap saves you buying the whole unit again. It is a practical way to add serious holding power without crowding your bench.
Designed in the USA, Tested in Real Shops
Swan Tool Group grew from a simple frustration with tools that would not hold their accuracy. Izzy Swan set out to fix that, drawing on a lifetime of craft that runs from hand-cut dovetails to CNC design.
Here is what that means for your workshop:
- Precision you can rely on, because every tool is engineered to a tight standard and checked before it ships.
- Durability that lasts, with materials and construction built for repeated shop use, not occasional handling.
- Real-world testing, since each design is proven in working shops before it reaches your bench.
Every product is backed by a no-hassle one-year limited warranty, so you can buy with confidence and get straight to work.
Frequently Asked Questions
What tools does Swan Tool Group make?
The range covers precision layout and measuring tools, including adjustable and double squares, offset rulers and ruler sets, depth stops, and vacuum holding tools like the Vac Puc and Grabo vac plate. Each one is designed to help you mark, measure and hold your work accurately.
Are Swan Tool Group products made in the USA?
Yes. Every tool is designed and engineered in the USA, then tested in real working shops before release. This hands-on testing helps make sure each tool performs reliably under everyday workshop conditions.
What is a Vac Puc and how does it work?
A Vac Puc is a vacuum holding tool that grips your workpiece firmly using suction. It suits clamping, jig and fixture work, especially on smooth surfaces where clamps get in the way. When the seal wears, you can fit a replacement seal rather than buying a new unit.
Which square should I choose for my work?
Match the square to the job. The Ridgway adjustable carpenter square suits general marking and layout, the Merlin flat double square handles precise reference work, and the Firehawk trim square is built for trim and joinery tasks like half-laps. Consider the size and type of work you do most often.
Do Swan Tool Group products come with a warranty?
Yes. Products are backed by a no-hassle one-year limited warranty. If something is not right, the warranty gives you peace of mind that your tool is covered while you get on with your projects.