CMT Raised Panel Set with Backcutter - 3 Piece Set

CMT Raised Panel Set with Backcutter - 3 Piece Set

Product Code:
800-521-11

800.521.11 - This set of router bits is designed for use in a router table, and provides all of the bits needed to create doors and drawer fronts, the panels to go into these, and the mechanical locking joint for solid timber drawers.
Please refer to the illustrations for complete profile and dimensions.
Tip: When using raised panel bits, rather than moving the router table constantly after each shallow pass, cut several 3mm shims of MDF or similar material to fit against the router table fence. This will limit the amount of material that can be removed in any one pass, and minimise the amount of fence adjustments needed.
Safety tips: the larger bits should be used between 10.000 and 12.000 RPM, three to five passes recommended. To be used with routers with at least 1700W (2-1/4 HP).

$555.00
$0.00 $555.00
Inc GST
Tax included. Shipping calculated at checkout.
Or from $10/week with
Or pay in 4 interest-free payments of $138.75
Carbatec offers a variety of warranties and return options for selected products. Please refer to the Warranty Documentation provided with your purchased product for full details, inclusions and exclusions. See our Terms Of Service for further information.
Need assistance?
We're Here To Help 9am - 5pm AEST Monday - Friday and 8am - 12pm AEST Saturdays
1800 658 111
Call us
View full details
Product Details

800.521.11 - This set of router bits is designed for use in a router table, and provides all of the bits needed to create doors and drawer fronts, the panels to go into these, and the mechanical locking joint for solid timber drawers.
Please refer to the illustrations for complete profile and dimensions.
Tip: When using raised panel bits, rather than moving the router table constantly after each shallow pass, cut several 3mm shims of MDF or similar material to fit against the router table fence. This will limit the amount of material that can be removed in any one pass, and minimise the amount of fence adjustments needed.
Safety tips: the larger bits should be used between 10.000 and 12.000 RPM, three to five passes recommended. To be used with routers with at least 1700W (2-1/4 HP).

Additional information
1 spec...
Bit Shank Size
1/2"