Lee Valley Thickness Calipers - 9"

Lee Valley Thickness Calipers - 9"

Product Code:
05N22-01

Primarily used by turners, these thickness calipers can be fitted into virtually any shape of vase or bowl.
To use, open the caliper by just pulling the legs apart (having the spacing nut between the legs rather than outside them allows this), put in position and then set the spacing nut to the wall thickness. Open calipers, remove and measure tip gap.
The spacing nut can be adjusted for any thickness from 0mm(0") to 140mm(5 1/2") on the 230mm(9") model. The respective throat depths (from nut to tip) is 140mm(5 1/2"). These are equally good for dimensional take-offs of almost any oddly shaped object. Steel with brass fittings.
Made in France for Lee Valley.

$125.00
$0.00 $125.00
Inc GST
Tax included. Shipping calculated at checkout.
Or from $10/week with
Or pay in 4 interest-free payments of $31.25
Carbatec offers a variety of warranties and return options for selected products. Please refer to the Warranty Documentation provided with your purchased product for full details, inclusions and exclusions. See our Terms Of Service for further information.
Need assistance?
We're Here To Help 9am - 5pm AEST Monday - Friday and 8am - 12pm AEST Saturdays
1800 658 111
Call us
View full details
Product Details

Primarily used by turners, these thickness calipers can be fitted into virtually any shape of vase or bowl.
To use, open the caliper by just pulling the legs apart (having the spacing nut between the legs rather than outside them allows this), put in position and then set the spacing nut to the wall thickness. Open calipers, remove and measure tip gap.
The spacing nut can be adjusted for any thickness from 0mm(0") to 140mm(5 1/2") on the 230mm(9") model. The respective throat depths (from nut to tip) is 140mm(5 1/2"). These are equally good for dimensional take-offs of almost any oddly shaped object. Steel with brass fittings.
Made in France for Lee Valley.