Veritas Right Angle Saw Guide

Veritas Right Angle Saw Guide

Product Code:
05T04-01

After receiving many requests from customers for a 90 version of the dovetail saw guide, Veritas has developed a right-angle saw guide for making finger joints, cutting tenons or on-the-spot trimming of small items. It is also ideal for beginners or children learning to make perfectly square perpendicular cuts on board ends.
Manufactured using the same precision-machined aluminum extrusion as our dovetail saw guides, each reference surface has an embedded 3/4" rare-earth magnet and is covered with a low-friction UHMW pad. The magnets keep the saw aligned as you cut; the pads allow the saw to slide easily against the reference surface. The clamp can accommodate material from 1/4" to 1" thick.
The guide can be used with any backless saw that has approximately 0.005" or less of tooth set.
Made in Canada.
Patented.

$98.00
$0.00 $98.00
Inc GST
Tax included. Shipping calculated at checkout.
Or from $10/week with
Or pay in 4 interest-free payments of $24.50
Carbatec offers a variety of warranties and return options for selected products. Please refer to the Warranty Documentation provided with your purchased product for full details, inclusions and exclusions. See our Terms Of Service for further information.
Need assistance?
We're Here To Help 9am - 5pm AEST Monday - Friday and 8am - 12pm AEST Saturdays
1800 658 111
Call us
View full details
Product Details

After receiving many requests from customers for a 90° version of the dovetail saw guide, Veritas has developed a right-angle saw guide for making finger joints, cutting tenons or on-the-spot trimming of small items. It is also ideal for beginners or children learning to make perfectly square perpendicular cuts on board ends.
Manufactured using the same precision-machined aluminum extrusion as our dovetail saw guides, each reference surface has an embedded 3/4" rare-earth magnet and is covered with a low-friction UHMW pad. The magnets keep the saw aligned as you cut; the pads allow the saw to slide easily against the reference surface. The clamp can accommodate material from 1/4" to 1" thick.
The guide can be used with any backless saw that has approximately 0.005" or less of tooth set.
Made in Canada.
Patented.