BOW Low Profile CNC Clamp - 2 Pack

Bow LPC2 Low Profile CNC Clamps: Strong Hold-Down Power, Clear of Your Cutting Path

Keep your workpiece locked down and your bit clear of obstruction. The Bow Products LPC2 Low Profile CNC Clamps give you strong side-pressure clamping in a compact form built specifically for CNC tables and T-Track setups. Because the clamps sit low across your work surface, you get maximum clearance above the board, so your tool path stays open and your cuts stay clean.

Derived from the full LPC1 Clamping Kit, the LPC2 strips things back for CNC users who wanted the same innovative clamps without the extra fences and dog components. You get four interchangeable tip types to match different materials and clamping jobs, adjustable hardware to suit varying spoilboard depths, and compatibility with both T-Track and screw-down tables. Precision-machined for long-term reliability, it is a purpose-built kit that holds firm where it counts.

Key Features

• Low-profile design: Sits low across the table to keep your cutting path clear and accessible while the clamp holds fast.
• Strong side-pressure clamping: Applies firm horizontal pressure to secure your workpiece without getting in the way of the bit.
• Interchangeable tips: Swap between Max Grip, Low Profile, Corner/Curved and EVA Holder tips to suit any material or clamping need.
• T-Track and screw-down compatible: Works with most CNC and T-Track tables, so it slots straight into your existing setup.
• Adjustable hardware: A full T-Bolt and barrel nut set accommodates varying spoilboard depths for a secure fit every time.

Main Applications

• Securing workpieces on CNC tables where clearance above the board is essential.
• Setting up quick, reliable clamping on T-Track benches and jigs.
• Adjusting hold-down height to match different spoilboard depths.
• Clamping across a range of material types and thicknesses with confidence.
• Adapting tip types to suit corners, curves, delicate stock or maximum grip.

Inclusions

• 2 x Low-Profile Clamps
• 2 x Max Grip Tips
• 2 x Low Profile Tips
• 2 x Corner / Curved Tips
• 2 x EVA Holder Tips
• 2 x T-Bolt 2" Length
• 2 x T-Bolt 1.5" Length
• 2 x T-Bolt 1.2" Length
• 2 x T-Bolt 0.875" Length
• 2 x T-Bolt 0.5" Length
• 2 x Long Barrel Nuts
• 2 x Short Barrel Nuts
• 2 x Index Washers
• 2 x Clamp Screw Adapters
• 1 x 3/16" Hex Ball End Screwdriver

Bring Bow's clamping technology straight to your CNC and T-Track work. Add the LPC2 Low Profile CNC Clamps to your cart today and clamp with confidence.