Carbatec 2HP Portable Dust Collector Bundle

Carbatec Portable Dust Collector 2HP Bundle: Strong Suction, Finer Filtration and a Complete Setup in One Order

Clear chips and shavings from your heavy machines, capture fine dust down to 1 micron and change bags without the mess. This bundle pairs the DC-1200P with the filter, hose, clamps and bags to set it up properly.

Jointers, thicknessers and saws produce a lot of chips and shavings quickly. A smaller extractor can't keep up, and you end up with dust on your bench, your floor and in the air you breathe. Cloth bags add to the problem. They let the finest particles through, and emptying them often sends a cloud of dust back into your workshop.

This bundle gives you a complete extraction setup built around the Carbatec Portable Dust Collector 2HP (DC-1200P). The 2HP induction motor moves 1200CFM of air, and the dual 4" ports let you connect two machines at once. The pleated filter cartridge upgrades your filtration from 5 microns to 1 micron. The TPU hose, tool-free clamps and clear plastic bags make the system easy to connect, move and maintain.

What's in the Bundle

• 1 × Carbatec Portable Dust Collector 2HP (DC-1200P)
• 1 × Carbatec Pleated Filter Cartridge
• 1 × Carbatec Plastic Collection Bags (1250mm long)
• 1 × Carbatec TPU Flex Dust Hose with Copper Helix, 4" × 6m
• 10 × Carbatec 4" (100mm) Band Hose Clamps with Thumbscrew

Key Features

• 2HP induction motor: Strong, reliable suction handles the output of jointers, thicknessers and other heavy machines.
• 1200CFM airflow: Moves large volumes of chips and dust quickly, so your surfaces and air stay cleaner.
• Dual 4" ports: Connect two machines at once and spend less time swapping hoses.
• Easy to move: Built-in castors let you roll the collector right beside the machine you're using.
• Quick-action clamps: Release and refit the collection bag in moments, so maintenance takes less time.
• Finer filtration: The pleated cartridge captures particles down to 1 micron. The standard filter bag captures particles down to 5 microns. Finer filtration means cleaner air and better protection for your lungs.
• Consistent airflow: The pleated design gives up to 700% more filter surface area than a standard bag. That helps keep suction steady during long sessions.
• Simple filter cleaning: Rotate the handles to turn the internal rubber beaters, which knock dust off the pleats. You don't need to remove the cartridge.
• Hard-wearing, flexible hose: TPU resists abrasion, tearing and repeated flexing. It stays supple without added plasticisers, so it's less likely to stiffen or crack, even when you drag it across concrete.
• Smoother airflow: The hose's smooth inner bore reduces turbulence. This helps maintain airflow over longer runs and through multiple connections.
• Static control: A copper wire helix runs the full length of the hose. You can earth it as part of a compliant extraction system to reduce static build-up.
• Tool-free hose changes: Thumbscrew band clamps fit and release by hand, so you can move the hose between machines quickly. They're also easier on your thumbs than standard screw clamps.
• Clean, quick bag changes: The clear plastic bags show you when they're full, so you won't overfill them and lose suction. When a bag is full, tie it off and throw it away. You won't need to shake out a cloth bag.

How to Set It Up

1. Position the collector: Roll the DC-1200P close to your machines on its built-in castors.
2. Fit the pleated cartridge: Install the pleated filter cartridge in place of the standard 5-micron filter bag for 1-micron filtration.
3. Attach a collection bag: Fit a clear plastic bag to the collection drum and secure it with the quick-action clamp.
4. Connect the hose: Run the TPU hose from a 4" port to your machine or ducting. Tighten a band clamp by hand at each connection.
5. Earth the hose: Connect the copper helix to earth as part of a compliant extraction system.
6. Maintain as you go: Rotate the cartridge handles regularly to clean the pleats. Tie off and replace the bag once it's full.

Workshop tip: Use plastic collection bags with the pleated cartridge rather than cloth bags. This keeps the system working at its best.

Specifications

• Cartridge compatibility: FM-300, DC-1200P and most 2HP dust extractors with 480mm drums
• Bag compatibility: DC-1200P, FM-300, JET-DC1200, CT-2042, DC-2300P and Powermatic PM1900. Check the bag dimensions against your extractor.
• Hose length: The 6m length is measured fully extended.
• Hose use: Dry dust extraction only. Suits CNC machines, planers, thicknessers and general workshop systems.

You get powerful suction, finer filtration and every connection you need in one order. Add the Carbatec Portable Dust Collector 2HP Bundle to your cart today and craft with confidence.