Carbatec 2HP Portable Dust Collector & Filter Bundle

Carbatec Portable Dust Collector 2HP Filter Bundle: Strong Suction and 1-Micron Filtration in One Order

Clear chips and shavings from your heavy machines and capture fine dust down to 1 micron. This bundle pairs the DC-1200P with the Pleated Filter Cartridge for cleaner air from day one.

Jointers, thicknessers and saws throw out chips and shavings fast. A smaller extractor can't keep up, so dust settles on your bench and floor and hangs in the air you breathe. A standard filter bag also lets the finest particles pass straight through. Those are the particles you can't see, and they matter most for your long-term health.

This bundle gives you a powerful extractor and a filtration upgrade together. The Carbatec Portable Dust Collector 2HP (DC-1200P) moves 1200CFM of air through dual 4" ports, so it handles heavy machinery with ease. The Pleated Filter Cartridge takes your filtration from 5 microns down to 1 micron and keeps suction steady through long sessions.

What's in the Bundle

• 1 × Carbatec Portable Dust Collector 2HP (DC-1200P)
• 1 × Carbatec Pleated Filter Cartridge

Key Features

• 2HP induction motor: Strong, reliable suction handles the output of jointers, thicknessers and other heavy machines without struggling.
• 1200CFM airflow: Large volumes of chips and dust are cleared quickly, so your surfaces and air stay cleaner.
• Dual 4" ports: You can connect two machines at once and spend less time swapping hoses.
• Built-in castors: Roll the collector right beside the machine you're using.
• Quick-action clamps: Release and refit the collection bag in moments, so maintenance takes less time.
• 1-micron filtration: The pleated cartridge captures particles down to 1 micron. The standard filter bag captures particles down to 5 microns. Finer filtration means cleaner air and better protection for your lungs.
• Consistent airflow: The pleated design gives up to 700% more filter surface area than a standard bag. Suction stays steady and you don't lose power partway through a long session.
• Simple filter cleaning: Rotate the handles to turn the internal rubber beaters, which knock dust off the pleats. You don't need to remove the cartridge.
• Matched fit: The cartridge is designed for the DC-1200P, so you know the two will work together straight out of the box.

How to Set It Up

1. Position the collector: Roll the DC-1200P close to your machines on its built-in castors.
2. Fit the pleated cartridge: Install the pleated filter cartridge in place of the standard 5-micron filter bag.
3. Attach a collection bag: Fit the collection bag to the drum and secure it with the quick-action clamp.
4. Connect your machines: Run 4" hose from one or both ports to your machines or ducting.
5. Maintain as you go: Rotate the cartridge handles regularly to clean the pleats. Empty or replace the collection bag once it's full.

Workshop tip: Use plastic collection bags with the pleated cartridge rather than cloth bags. This keeps the system working at its best and helps protect your cleaner workshop air.

Specifications

• Cartridge compatibility: FM-300, DC-1200P and most 2HP dust extractors with 480mm drums
• Suits: Thicknessing, jointing, sawing, sanding and other heavy-dust tasks in serious home workshops and small businesses

You get powerful suction and finer filtration in one order, ready to protect your workshop and your health. Add the Carbatec Portable Dust Collector 2HP Filter Bundle to your cart today and craft with confidence.