Carbatec Professional Twin Bag Dust Collector Bundle

Carbatec Dust Collection Bundle: A Complete Extraction Setup for Cleaner Air and Steady Suction

Collect chips, capture fine dust and change bags without the mess. This bundle gives you a mobile twin bag dust collector plus the filters, hose, clamps and bags to set it up properly.

Planers, thicknessers and lathes produce a lot of waste quickly. When your extractor loses suction, the hose kinks or splits, or emptying cloth bags fills the air with dust, your workshop gets messier and less healthy. Swapping hoses between machines can also slow you down when clamps need a screwdriver.

This Carbatec Dust Collection Bundle solves those problems together. You get the Professional Twin Bag Dust Collector, two pleated filter cartridges for finer filtration, a 6m TPU hose, 10 tool-free hose clamps and clear plastic collection bags. Together they give you a dust collection system that's easy to move, simple to maintain and ready for single machines or ducting networks.

What's in the Bundle

• 1 × Carbatec Professional Twin Bag Dust Collector
• 2 × Carbatec Pleated Filter Cartridges
• 1 × Carbatec TPU Flex Dust Hose with Copper Helix, 4" × 6m
• 10 × Carbatec 4" (100mm) Band Hose Clamps with Thumbscrew
• 1 × Carbatec Plastic Collection Bags (1250mm long)

Key Features

• High-capacity collection: Extra-height drums and longer collection bags hold more chips, so you stop to empty less often.
• Easy to move: Heavy-duty casters let you roll the collector where you need it, and the 10amp plug suits standard power outlets.
• Finer filtration: The pleated cartridges capture particles down to 1 micron, compared with 5 microns for the standard filter bags. That means cleaner air and better protection for your lungs.
• Consistent airflow: The pleated design gives up to 700% more filter surface area than standard bags. Suction stays steady during long sessions.
• Simple filter cleaning: Rotate the handles to turn the internal rubber beaters, which knock dust off the pleats. You don't need to remove the cartridge.
• Hard-wearing, flexible hose: TPU resists abrasion, tearing and repeated flexing. It stays supple without plasticisers, so it's less likely to stiffen or crack, even when you drag it over concrete.
• Smoother airflow: The hose's smooth inner bore reduces turbulence, which helps maintain airflow over longer runs and multiple connections.
• Static control: A copper wire helix runs the full length of the hose. You can earth it as part of a compliant extraction system to reduce static build-up.
• Tool-free hose changes: Thumbscrew band clamps fit and release by hand, so you can move the hose between machines quickly. They're also easier on your thumbs than standard screw clamps.
• Clean, quick bag changes: Clear plastic bags show you when they're full. When they are, you tie them off and throw them away. You don't have to shake out a cloth bag or deal with a dust cloud.

How to Set It Up

1. Position the collector: Roll the dust collector close to your machines and plug it into a standard 10amp outlet.
2. Fit your filters: Use the twin 5 micron filter bags, or fit the pleated cartridges for 1 micron filtration.
3. Attach the collection bags: Fit the clear plastic bags to the collection drums.
4. Connect the hose: Run the TPU hose from the collector to your machine or ducting, then tighten a band clamp by hand at each connection.
5. Earth the hose: Connect the copper helix to earth as part of a compliant extraction system.
6. Maintain as you go: Rotate the cartridge handles regularly to clean the pleats. Tie off and replace bags once they're full.

Workshop tip: Use plastic collection bags with pleated cartridges rather than cloth bags. This keeps the system working at its best.

Specifications

• Cartridge compatibility: FM-300, DC-1200P and most 2HP dust extractors with 480mm drums
• Bag compatibility: DC-1200P, FM-300, JET-DC1200, CT-2042, DC-2300P and Powermatic PM1900. Check bag dimensions against your extractor.
• Hose length: The 6m length is measured fully extended.
• Hose use: Dry dust extraction only. Suits CNC machines, planers, thicknessers and general workshop systems.

Get a cleaner, more efficient dust collection setup in one order. Add the Carbatec Dust Collection Bundle to your cart today and craft with confidence.