Veritas Chamfer Guide for Block Plane

Veritas Chamfer Guide for Block Plane

Product Code:
05P22-10

You can convert our Veritas low-angle block plane and standard block plane into chamfer planes in seconds with this cunning guide.
Easy to install you first set the chamfer width on the guide, then install the guide by unscrewing the front knob of the plane, replacing the toe piece with the chamfer guide and tightening the knob again. It is ready to go.
Adjustable for chamfers up to 1/2" wide, the guide wings are fixed at a 90 angle to hold the plane body at a consistent 45 to the work face.
Made of anodized aluminum.
Made in Canada. Patented.

$61.00
$0.00 $61.00
Inc GST
Tax included. Shipping calculated at checkout.
Or from $10/week with
Or pay in 4 interest-free payments of $15.25
Carbatec offers a variety of warranties and return options for selected products. Please refer to the Warranty Documentation provided with your purchased product for full details, inclusions and exclusions. See our Terms Of Service for further information.
Need assistance?
Call centre hours: 9am - 5pm AEST Mon - Fri. Closed weekends & public holidays
1800 658 111
Call us
View full details
Product Details

You can convert our Veritas low-angle block plane and standard block plane into chamfer planes in seconds with this cunning guide.
Easy to install — you first set the chamfer width on the guide, then install the guide by unscrewing the front knob of the plane, replacing the toe piece with the chamfer guide and tightening the knob again. It is ready to go.
Adjustable for chamfers up to 1/2" wide, the guide wings are fixed at a 90° angle to hold the plane body at a consistent 45° to the work face.
Made of anodized aluminum.
Made in Canada. Patented.