Kustom High Speed Polish Step 1 and 2 Large Set

Kustom High Speed Polish is a food grade low allergenic buffing/ polishing compound for use with any kind of buffing system, that can also be used as a friction polish.Like the Kustom Grit range, it is available in two "steps", rated at #50'000 and #100'000 grit respectively, but unlike the Grit pastes in this case, is formulated into a hard set bar. This set of Step 1 and Step 2 large bars are 200 grams each and represent the best bang for buck. They are the most appropriate size for applying to powered buffing wheels/buffing systems. Great for polishing virtually anything you want to polish on a buffing wheel - metals, timber, other hard finishes - anything you would normally use a buffing wheel for.Additionally, Kustom High Speed Polish can be used as a "friction" polish, applied directly to lathe work. Apply by pressing the bar against your piece while running, or while off, draw on like a crayon, then use a fine cloth to melt and buff the finish while turning! Perfect for acrylic, resin or timber pens and many other projects. Leaves a long lasting and hard wearing high polish.So versatile, it can also be applied to leather strops for honing your tools!Colour coded labels assist in identifying the correct grit quickly: Red = Step 1; Blue = Step 2 and this is carried across other products in the Kustom Range.TIP - the bar is cast with the Step 1 or 2 into the mould. Using it from the back and opposite end to the number means you will always know which bar to put in which box after use - right up until you need to replace it!
Also available in a smaller bar which is great for trying the product, or for use as a friction polish or strop compound.NB: Always wear eye protection while using powered buffing systems