Narex Heavy Duty Impact Chisel 4 Piece Set

Narex HEAVY DUTY 4-Piece Impact Chisel Set: Strength to Chop Deep Mortises and Drive Through Tough Timber

Heavy chopping is hard on chisels. Drive an ordinary chisel into a deep mortise or a dense, knotty hardwood and the handle can split, the tang can loosen and the blade can twist off line. The Narex HEAVY DUTY 4-Piece Impact Chisel Set is built for exactly this kind of work. Each blade runs right through the handle to a solid steel striking end, so you can strike hard and often and keep the chisel stable and on track.

Four practical widths in a protective case give you the strength and stability for your toughest carpentry and joinery.

Key Features

• Through-tang construction: The steel runs the full length of the tool, from the cutting edge through the handle to the striking end. The force of each blow travels straight down the steel instead of through the handle. You get maximum strength and stability when chopping deep mortises or removing large amounts of timber.
• Solid steel striking end: The robust steel cap takes strong, repeated blows from a hammer or heavy mallet. You can drive through hard knots and dense wood with confidence, without battering the handle.
• Forged, heat-treated steel blade: Each blade is forged from high-quality steel and heat-treated for durability. The edge holds up to the shock and stress of heavy striking.
• Precisely ground and sharpened: The chisels arrive ready to work, so you can start chopping clean, accurate mortises straight away.
• Transparent handle: You can see the tang inside the handle and check the tool's integrity at a glance. It also gives the set a distinctive look on your bench.
• Ergonomic, durable handle: The handle is shaped for a safe, comfortable grip, so you can guide the chisel accurately between blows.
• Anti-roll contoured shape: The handle's contours stop the chisel from rolling off your bench. That protects your edges and keeps your workspace safer.
• Four essential widths: The 6mm, 12mm, 20mm and 26mm sizes cover narrow mortises, general chopping and heavy waste removal.
• Plastic storage case: Keeps the set organised and the edges protected in your workshop or on site.
• Made by Narex: Narex has decades of experience making quality woodworking hand tools, and this set is built to last.

Ideal For

• Furniture makers chopping deep mortises for mortise and tenon joints.
• Carpenters and joiners tackling heavy waste removal and structural work.
• Boat builders and timber framers working with dense, demanding timbers.
• Woodworkers cutting through hardwoods with knots and difficult grain.
• Professional workshops that need tough tools for long, heavy-use service.

Specifications

• Product: Narex HEAVY DUTY 4-Piece Impact Chisel Set.
• Blade: Forged high-quality steel, heat-treated, precisely ground and sharpened.
• Construction: Through-tang extending to the striking end.
• Handle: Ergonomic, highly durable transparent material with anti-roll contoured shape.
• Striking end: Solid steel, suitable for hammer or heavy mallet.
• Storage: Plastic case.
• Pieces per package: 4.
• Weight (including packaging): 1.74kg

A quick tip: when you chop a mortise, choose the chisel that matches your mortise width and mark both ends with a marking knife. Start in the centre and work towards each end, keeping the chisel upright and stopping a few millimetres short of your lines. Lever out the waste as you go, then make your final cuts right on the lines once most of the timber is gone. Strike squarely on the steel end with firm, controlled blows, and keep the edge honed. A sharp chisel cuts cleaner and needs less force.

Add the Narex HEAVY DUTY 4-Piece Impact Chisel Set to your cart today for deep mortises, heavy chopping and tough timber, and craft with confidence.