CMT Panel Pilot Bit - 1/4" Diameter

The ideal way to cut out openings in panelling, gyprock, doors and windows. This bit saves time over other methods, with the point plunging smoothly and easily through the top layer. The carbide cutting edges then cut efficiently guided by the solid metal shaft of the router bit below the tip. This guide will not gum up or jam like other bearings. The generous cut length and diameter of the cutter allows it to cope with thicker materials gyprock, veneers and solid timber, not just laminate.
Safety tips: Always use extra caution when working near electrical outlets and boxes - always disconnect the current. Make sure the bit does not go so deep as to cut the wires.